Sometimes it takes 3-4 tries to successfully observe a table

Report bugs found in Poker Mavens
Raventhon
Posts: 166
Joined: Thu Mar 20, 2014 3:37 pm

Sometimes it takes 3-4 tries to successfully observe a table

Post by Raventhon »

From time to time, when I attempt to view a table, it just pops up a blank table. I have to close the table, re-view it, and hope it works. This seems to not be intended behavior, so I thought I'd report it.

Using the most recent version of chrome on http://pokershibes.com.
Raventhon
Posts: 166
Joined: Thu Mar 20, 2014 3:37 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Raventhon »

When I say blank, I mean that it fails to load the seats or anyone in the seats or the cards or the pot amount or anything - it's just the table backing graphic.
Kent Briggs
Site Admin
Posts: 5878
Joined: Wed Mar 19, 2008 8:47 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Kent Briggs »

Next time that happens, long-click the Help menu in the Lobby to bring up the debug window and see if there are any error messages, marked by "ERR" in the second column.
Kent Briggs
Site Admin
Posts: 5878
Joined: Wed Mar 19, 2008 8:47 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Kent Briggs »

Also, does the Menu still work? If so, what happens if you invoke it and select "Refresh table"?
riclesb
Posts: 58
Joined: Tue Jul 23, 2013 2:02 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by riclesb »

I have seen this issue as well if I X out faulty table and retry it usually comes up on second try. will look for errors next time it happens.
Raventhon
Posts: 166
Joined: Thu Mar 20, 2014 3:37 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Raventhon »

Kent Briggs wrote:Also, does the Menu still work? If so, what happens if you invoke it and select "Refresh table"?
http://i.gyazo.com/ad128be72ecb5776a0b7f197ab11a3a0.png

Menu => Refresh Table refreshes it successfully and loads it, it's just very strange.
Kent Briggs
Site Admin
Posts: 5878
Joined: Wed Mar 19, 2008 8:47 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Kent Briggs »

Those Audio errors should be fixed now in 4.24. What do you have set for "Max FP connections" and "Max FP connections per IP" in the Server Settings group?
Raventhon
Posts: 166
Joined: Thu Mar 20, 2014 3:37 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Raventhon »

The audio bugs aren't the issue - the line that causes the blank table is the last one, confirmed on another sighting today:

ERR Command: Flop Error: TypeError: Cannot read property 'css' of undefined

Same bug as here (http://www.briggsoft.com/forums/viewtop ... =10&t=1672)
Kent Briggs
Site Admin
Posts: 5878
Joined: Wed Mar 19, 2008 8:47 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Kent Briggs »

I suspect that the table is trying to execute an action packet (such as dealing the flop) before it has time to render all the image elements, or couldn't retrieve them from the server. Which is why I asked about those FP settings.
Raventhon
Posts: 166
Joined: Thu Mar 20, 2014 3:37 pm

Re: Sometimes it takes 3-4 tries to successfully observe a t

Post by Raventhon »

FP / PP both 8 per IP.
Post Reply