% of rake

For general discussion of the Poker Mavens software
Post Reply
luruke
Posts: 7
Joined: Wed Jun 16, 2010 10:40 am

% of rake

Post by luruke »

hi, i want to apply the 5% of rake on ring games, it's possibly?
Kent Briggs
Site Admin
Posts: 5878
Joined: Wed Mar 19, 2008 8:47 pm

Re: % of rake

Post by Kent Briggs »

luruke wrote:hi, i want to apply the 5% of rake on ring games, it's possibly?
You do that as a ratio with the Rake and RakeEvery settings. For example, Rake = 1, RakeEvery = 20 would rake 1 chip from every 20 in the pot. Or Rake = 5, RakeEvery = 100 which rakes 5 chips from every 100 in the pot. Both are 5% but kick in at different points, depending on what you want. There is also a RakeMax setting that puts a rake limit on each pot.
luruke
Posts: 7
Joined: Wed Jun 16, 2010 10:40 am

Re: % of rake

Post by luruke »

if a set the buy-in, 1-10, how i can do it?
Kent Briggs
Site Admin
Posts: 5878
Joined: Wed Mar 19, 2008 8:47 pm

Re: % of rake

Post by Kent Briggs »

luruke wrote:if a set the buy-in, 1-10, how i can do it?
The lowest 5% increment is 1 of 20 so if that is too high for you then you need to adjust your chip scaling accordingly. Poker Mavens supports a buy-in range of 10 to 1,000,000 chips so there is plenty of range to work with.
Post Reply