Connection issues.

[EternallyJax]

So i have set up the server on my own system but im using ngrok to portforward ( dont have access to the router settings of my own)
I have the beige connecting screen appearing and the loading animation (very briefly) but the client itself isnt loading.

Works perfectly fine on localhost.
Any suggestions?

[Kent Briggs]

I don't know anything about ngrok. Which ports are you using? Make sure your ISP isn't blocking those incoming if you're on a residential plan. Also have someone outside of your network test the link as you may not have NAT Loopback capability. Or just use your cell phone for the test.

[EternallyJax]

File port 8080
Packet port 8088

This is how i have gotten to where im at... 8087/8088 dont seem to work i end up with 502 error instead.
Ngrok basically acts as a port forwarder. instead of my personal IP it would forward through ngrok which offers an ipv6.ngrok.org address people can use to access your client on a home network

[EternallyJax]

will end up getting a vps for this most likely

[Kent Briggs]

Also make sure PM is open in the Windows firewall and that you don't have an overzealous security/anti-virus app running that could be blocking. Otherwise it's probably ngrok not configured correctly.