% of rake

For general discussion of the Poker Mavens software

% of rake

Postby luruke » Mon Jun 28, 2010 3:40 am

hi, i want to apply the 5% of rake on ring games, it's possibly?
luruke
 
Posts: 7
Joined: Wed Jun 16, 2010 10:40 am

Re: % of rake

Postby Kent Briggs » Mon Jun 28, 2010 9:11 am

luruke wrote:hi, i want to apply the 5% of rake on ring games, it's possibly?


You do that as a ratio with the Rake and RakeEvery settings. For example, Rake = 1, RakeEvery = 20 would rake 1 chip from every 20 in the pot. Or Rake = 5, RakeEvery = 100 which rakes 5 chips from every 100 in the pot. Both are 5% but kick in at different points, depending on what you want. There is also a RakeMax setting that puts a rake limit on each pot.
Kent Briggs - [email protected]
Briggs Softworks - http://www.briggsoft.com
Kent Briggs
Site Admin
 
Posts: 3763
Joined: Wed Mar 19, 2008 8:47 pm

Re: % of rake

Postby luruke » Mon Jun 28, 2010 9:26 am

if a set the buy-in, 1-10, how i can do it?
luruke
 
Posts: 7
Joined: Wed Jun 16, 2010 10:40 am

Re: % of rake

Postby Kent Briggs » Mon Jun 28, 2010 9:48 am

luruke wrote:if a set the buy-in, 1-10, how i can do it?


The lowest 5% increment is 1 of 20 so if that is too high for you then you need to adjust your chip scaling accordingly. Poker Mavens supports a buy-in range of 10 to 1,000,000 chips so there is plenty of range to work with.
Kent Briggs - [email protected]
Briggs Softworks - http://www.briggsoft.com
Kent Briggs
Site Admin
 
Posts: 3763
Joined: Wed Mar 19, 2008 8:47 pm


Return to General

Who is online

Users browsing this forum: No registered users and 4 guests

cron